Car Sound Whistle Description: This turbo sound whistle makes your vehicle sound like a turbo vehicle with the turbo system or blow the valve. Made of high quality aluminum, lightweight and durable. Easy to install on the vehicle exhaust. Loosen the bolt on the Turbo Sound Whistle. Insert the Turbo Sound Whistle into the exhaust pipe. Tighten the screw so as not to fall while driving. Make sure the exhaust pipe is large and long enough to accommodate the Turbo Sound Whistle. Please check and tighten the screw regularly.10- Installing turbochargers in a vehicle aftermarket requires a modification plate. If you plan to modify your engine, it is best to contact a qualified company to issue the modification label for the desired modifications. This way, you can discuss the regulations and make sure you buy parts that you can keep on the vehicle. If I`m right, it`s a „turbo” whistler. You`ll squeeze it into your exhaust tip and when you`re driving, it makes a turbo-like noise (if you can call it that). If you have any doubts about the modifications made to your vehicle, contact the Ministry of Transport and they can let you know if you are legally authorized to make the changes.
For vehicles manufactured from July 1, 1976, the installation of a turbocharger or compressor requires one of the following components: 1- One of the most common points is the size of the car`s wheels. Nothing makes a car more difficult than a brand new set of alloy wheels. What should be noted is that to pass a safety certificate in Queensland, the Department of Transport allows the vehicle to have 2-inch wheels larger or smaller than the size with which the vehicle comes from the factory standard. Anything above or below this is illegal and will not happen. Safety certificate Inspection Passenger cars and their derivatives (suppliers of vehicles and panel vans) manufactured before 1 July 1976 and equipped with petrol engines may be equipped with a turbocharger or compressor for the original manufacturer`s engine without DIT approval. Changing the turbocharged pressure of an engine is unacceptable. This is specified and specified by the vehicle manufacturer to ensure compliance with Australian design rules. If the driving height of a vehicle is lowered, the vehicle must also meet other legal requirements – for example: Lowering the vehicle affects the height of the vehicle`s lights and reflectors, and these must remain within certain legal limits, that is, the headlights must be at least 500 mm above the ground, measured from the center of the light.
5 – Seats – Remove, add or change bucket seats. All seat modifications require a modification plate to be legal. There are many regulations and specifications that must be followed when changing seats in a vehicle. Common seat distances are when a van is converted to an RV and the rear seats are removed to make room for a bed, or when a bench seat is removed from an older vehicle and replaced with bucket seats. The only problem is that some of these items are actually illegal and if you have locked your car, you need to know what changes can be made according to the rules and that your vehicle will be kept in driving condition. 6- Xenon headlights cannot be installed on the aftermarket of a vehicle, although they are fitted as standard on some ex-factory vehicles. The reason for this is that high-intensity discharge lenses mounted in headlights have headlight sets and self-leveling washers. However, it is acceptable to incorporate these lenses into the tail light of a vehicle as a spare part. 2- Another favorite is the shade of the window. This makes a big difference for the temperature in the vehicle and more comfortable summer commutes, but you should keep in mind that there is a limit to the darkness of the hue that is legal. Anything darker than 35% is illegal and the vehicle will not pass a safety certificate inspection.
External discharge valves on turbo engines are not allowed. 8- The removal of leaf springs or coil springs to mount the airbag suspension is illegal. It is often used by vehicle owners who want to control the height of their vehicle from very low to normal. However, the airbag suspension can be used in conjunction with their current suspension system to support larger weight loads.